CPU
PIC18(L)F25K50
Flash: 32K
SRAM: 2K
http://ww1.microchip.com/downloads/en/D ... 00684B.pdf
Physical dimensions:
Width: 37 mm
Height: 48 mm
Depth: 11 mm
Weight: 7.5g
Power requirements
Power Input:
Micro USB socket
3v CR2032 Battery
3v (Vcc) on header
Current Usage:
Standby : 15uA
Active : 2mA
Max : 20mA (All LEDs on)
Inputs & Outputs
2x microswitches "A & B"
4x GPIO
5x5 LED array
I2C on header
USB (tether)
(please post any corrections & additions)
Hardware spec
Re: Hardware spec
Ah, they do have a datasheet now:
http://www.codebug.co.uk/whatiscodebug/
http://www.codebug.co.uk/assets/extras/ ... asheet.pdf
tidbit:
I/O Sink/Source: 25mA
http://www.codebug.co.uk/whatiscodebug/
http://www.codebug.co.uk/assets/extras/ ... asheet.pdf
tidbit:
I/O Sink/Source: 25mA
Re: Hardware spec
Teaser in the datasheet:
Fitting expansions The expansion port provides I2C, SPI and UART connectivity to possible addons. Addon modules (called Tails) are available to extend CodeBug™’s capabilities. To fit an optional add on module (available separately), gently slide the expansion pins into the expansion port, making sure the pin labels match up.